Ember cavity mesh for wall and ventilation openings
Ember Cavity Mesh is fine, powder-coated woven aluminium mesh for screening suitable cavity and ventilation openings. It uses the same mesh and specifications as our Ember Mesh range, presented for cavity applications where finer screening is needed.
Where can Ember Cavity Mesh be used?
- At the top or base of drained and ventilated wall cavities where the approved detail permits mesh screening.
- At suitable wall-cladding, eave or soffit ventilation openings.
- Across suitable subfloor or roof ventilation openings where the mesh, fixing and completed opening meet the project’s requirements.
Choose a width that covers the opening and allows for the specified overlaps and fixings. The completed detail must maintain the required ventilation and drainage.
Specifications
- Roll lengths: 10 m and 30 m
- Widths: 250 mm, 500 mm and 1000 mm
- Average aperture: 1.9 mm
- Mesh thickness: 0.5 mm
- Material: woven aluminium with a double-rolled edge
- Finish: Akzo Nobel D1010 powder coating
- 20-year product warranty
NCC 2025, wall cavities and ventilation
The National Construction Code (NCC) 2025 Housing Provisions, Part 10.8.1, includes requirements for drained and ventilated wall cavities. In climate zones 6, 7 and 8, many wall assemblies require a cavity, subject to the provision’s scope and exceptions. The applicable NCC edition and local variations depend on the project location and approval date.
Where clause 10.8.1(4) applies, openings must provide a free area of at least 1,000 mm² per metre of wall at the base and top, or at each storey or level where the cavity is closed, subject to the clause’s exceptions. Fine mesh, fixings and surrounding components can reduce the free area. Have the builder or designer check the completed detail, including ventilation and drainage; the mesh alone does not establish NCC compliance. See the Victorian Building and Plumbing Commission’s NCC 2025 moisture-management guidance.
Bushfire and ember screening
Ember Mesh is listed for ember screening up to BAL-29 within its documented application and installation limits. Bushfire requirements depend on the opening, the assessed Bushfire Attack Level, the applicable NCC and AS 3959 requirements, and the complete fixing detail. Some applications require a maximum mesh aperture of 2 mm; the stated 1.9 mm average aperture alone does not establish the maximum. Confirm the product evidence, opening and fixing method with the builder or certifier before use. For general information, see the WA Government’s bushfire building guidance.
Ember or Universal cavity mesh?
Choose Ember for finer screening where its documented application suits the project. For general screening without an ember-guard requirement, compare Universal Cavity Mesh, which has a 3.5 mm average aperture. The building design determines the correct product and installation.
Frequently asked questions
What is Ember Cavity Mesh used for?
It is fine woven aluminium mesh for screening suitable cavity and ventilation openings. The opening and installation must meet the needs of the project.
Can it be used with NCC 2025 wall cavities?
It can be considered for a suitable opening in a drained and ventilated wall cavity. The designer or builder must check the applicable code edition, net free area, drainage, fixings and local variations.
Is it suitable for bushfire-prone areas?
Ember Mesh is listed for ember screening up to BAL-29 within its documented application and installation limits. Confirm the maximum aperture and the full opening and fixing detail against the project requirements.
What sizes are available?
Choose a 10 m or 30 m roll in 250 mm, 500 mm or 1000 mm widths. Colour and availability vary by selection.
How should the mesh be installed?
Measure the opening, allow for the specified overlaps and fixings, and secure the mesh with a method suited to the substrate. Keep required ventilation and drainage clear and follow the approved project detail.
Explore the full cavity closer mesh range or contact us for help selecting a roll.
Delivery
- Free delivery on orders over $300
- Delivery options and charges are calculated at checkout




























Reviews
There are no reviews yet.